// SPDX-License-Identifier: MIT
// solhint-disable comprehensive-interface
pragma solidity 0.8.16;
import "../interfaces/IWeb3Entry.sol";
import "../libraries/OP.sol";
import "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/token/ERC777/IERC777Recipient.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC777/IERC777.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/introspection/IERC1820Registry.sol";
/**
* @dev Implementation of a contract to keep characters for others. The address with
* the ADMIN_ROLE are expected to issue the proof to users. Then users could use the
* proof to withdraw the corresponding character.
*/
contract NewbieVilla is Initializable, AccessControlEnumerable, IERC721Receiver, IERC777Recipient {
bytes32 public constant ADMIN_ROLE = keccak256("ADMIN_ROLE");
IERC1820Registry public constant ERC1820_REGISTRY =
IERC1820Registry(0x1820a4B7618BdE71Dce8cdc73aAB6C95905faD24);
bytes32 public constant TOKENS_RECIPIENT_INTERFACE_HASH = keccak256("ERC777TokensRecipient");
address public web3Entry;
address public xsyncOperator;
// slither-disable-next-line naming-convention
address internal _token; // mira token, erc777 standard
// characterId => balance
// slither-disable-next-line naming-convention
mapping(uint256 => uint256) internal _balances;
// events
/**
* @dev Emitted when the web3Entry character nft is withdrawn.
* @param to The receiver of web3Entry character nft.
* @param characterId The character ID.
* @param token Addresses of token withdrawn.
* @param amount Amount of token withdrawn.
*/
event Withdraw(address to, uint256 characterId, address token, uint256 amount);
modifier _notExpired(uint256 expires) {
require(expires >= block.timestamp, "NewbieVilla: receipt has expired");
_;
}
/**
* @notice Initialize the Newbie Villa contract.
* @dev msg.sender will be granted `DEFAULT_ADMIN_ROLE`.
* @param web3Entry_ Address of web3Entry contract.
* @param xsyncOperator_ Address of xsyncOperator.
* @param token_ Address of ERC777 token.
* @param admin_ Address of admin.
*/
function initialize(
address web3Entry_,
address xsyncOperator_,
address token_,
address admin_
) external reinitializer(2) {
web3Entry = web3Entry_;
xsyncOperator = xsyncOperator_;
_token = token_;
// grants `DEFAULT_ADMIN_ROLE`
_setupRole(DEFAULT_ADMIN_ROLE, admin_);
// register interfaces
ERC1820_REGISTRY.setInterfaceImplementer(
address(this),
TOKENS_RECIPIENT_INTERFACE_HASH,
address(this)
);
}
/**
* @notice Withdraw character#`characterId` to `to` using the nonce, expires and the proof.
* Emits the `Withdraw` event.
* @dev Proof is the signature from someone with the ADMIN_ROLE. The message to sign is
* the packed data of this contract's address, `characterId`, `nonce` and `expires`.
*
* Here's an example to generate a proof:
* ```
* digest = ethers.utils.arrayify(
* ethers.utils.solidityKeccak256(
* ["address", "uint256", "uint256", "uint256"],
* [newbieVilla.address, characterId, nonce, expires]
* )
* );
* proof = await owner.signMessage(digest);
* ```
*
* Requirements:
* - `expires` is greater than the current timestamp
* - `proof` is signed by the one with the ADMIN_ROLE
*
* @param to Receiver of the withdrawn character.
* @param characterId The token id of the character to withdraw.
* @param nonce Random nonce used to generate the proof.
* @param expires Expire time of the proof, Unix timestamp in seconds.
* @param proof The proof using to withdraw the character.
*/
function withdraw(
address to,
uint256 characterId,
uint256 nonce,
uint256 expires,
bytes memory proof
) external _notExpired(expires) {
bytes32 signedData = _prefixed(
keccak256(abi.encodePacked(address(this), characterId, nonce, expires))
);
require(
hasRole(ADMIN_ROLE, _recoverSigner(signedData, proof)),
"NewbieVilla: unauthorized withdraw"
);
// transfer web3Entry nft
IERC721(web3Entry).safeTransferFrom(address(this), to, characterId);
// send token
uint256 amount = _balances[characterId];
_balances[characterId] = 0;
IERC777(_token).send(to, amount, ""); // solhint-disable-line check-send-result
emit Withdraw(to, characterId, _token, amount);
}
/**
* @dev Whenever a character `tokenId` is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called. `data` will be decoded as an address and set as
* the operator of the character. If the `data` is empty, the `operator` will be default operator of the
* character.
*
* Requirements:
*
* - `msg.sender` must be address of Web3Entry.
* - `operator` must has ADMIN_ROLE.
*
* @param data bytes encoded from the operator address to set for the incoming character.
*
*/
function onERC721Received(
address operator,
address,
uint256 tokenId,
bytes calldata data
) external override returns (bytes4) {
// Only character nft could be received, other nft, e.g. mint nft would be reverted
require(msg.sender == web3Entry, "NewbieVilla: receive unknown token");
// Only admin role could send character to this contract
require(hasRole(ADMIN_ROLE, operator), "NewbieVilla: receive unknown character");
if (data.length == 0) {
IWeb3Entry(web3Entry).grantOperatorPermissions(
tokenId,
operator,
OP.DEFAULT_PERMISSION_BITMAP
);
} else {
address selectedOperator = abi.decode(data, (address));
IWeb3Entry(web3Entry).grantOperatorPermissions(
tokenId,
selectedOperator,
OP.DEFAULT_PERMISSION_BITMAP
);
}
IWeb3Entry(web3Entry).grantOperatorPermissions(
tokenId,
xsyncOperator,
OP.POST_NOTE_DEFAULT_PERMISSION_BITMAP
);
return IERC721Receiver.onERC721Received.selector;
}
/// @inheritdoc IERC777Recipient
function tokensReceived(
address,
address,
address to,
uint256 amount,
bytes calldata userData,
bytes calldata operatorData
) external override(IERC777Recipient) {
require(msg.sender == _token, "NewbieVilla: invalid token");
require(address(this) == to, "NewbieVilla: invalid receiver");
/**
* @dev The userData/operatorData should be an abi encoded bytes of `fromCharacterId` and `toCharacter`,
* which are both uint256 type, so the length of data is 64.
*/
bytes memory data = userData.length > 0 ? userData : operatorData;
if (data.length == 64) {
(, uint256 toCharacterId) = abi.decode(data, (uint256, uint256));
_balances[toCharacterId] += amount;
} else {
revert("NewbieVilla: unknown receiving");
}
}
/**
* @dev Returns the amount of tokens owned by `characterId`.
*/
function balanceOf(uint256 characterId) external view returns (uint256) {
return _balances[characterId];
}
/**
* @notice Returns the address of mira token contract.
* @return The address of mira token contract.
*/
function getToken() external view returns (address) {
return _token;
}
function _splitSignature(
bytes memory sig
) internal pure returns (uint8 v, bytes32 r, bytes32 s) {
require(sig.length == 65, "NewbieVilla: wrong signature length");
/* solhint-disable no-inline-assembly */
assembly {
// first 32 bytes, after the length prefix.
r := mload(add(sig, 32))
// second 32 bytes.
s := mload(add(sig, 64))
// final byte (first byte of the next 32 bytes).
v := byte(0, mload(add(sig, 96)))
}
/* solhint-enable no-inline-assembly */
return (v, r, s);
}
function _recoverSigner(bytes32 message, bytes memory sig) internal pure returns (address) {
(uint8 v, bytes32 r, bytes32 s) = _splitSignature(sig);
return ecrecover(message, v, r, s);
}
function _prefixed(bytes32 hash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
}
@openzeppelin/contracts/access/AccessControl.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (access/AccessControl.sol)
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role);
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `_msgSender()` is missing `role`.
* Overriding this function changes the behavior of the {onlyRole} modifier.
*
* Format of the revert message is described in {_checkRole}.
*
* _Available since v4.6._
*/
function _checkRole(bytes32 role) internal view virtual {
_checkRole(role, _msgSender());
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view virtual {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(account),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleGranted} event.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleRevoked} event.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*
* May emit a {RoleRevoked} event.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* May emit a {RoleGranted} event.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*
* May emit a {RoleGranted} event.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*
* May emit a {RoleRevoked} event.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)
pragma solidity ^0.8.0;
import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";
/**
* @dev Extension of {AccessControl} that allows enumerating the members of each role.
*/
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
using EnumerableSet for EnumerableSet.AddressSet;
mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
return _roleMembers[role].at(index);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
return _roleMembers[role].length();
}
/**
* @dev Overload {_grantRole} to track enumerable memberships
*/
function _grantRole(bytes32 role, address account) internal virtual override {
super._grantRole(role, account);
_roleMembers[role].add(account);
}
/**
* @dev Overload {_revokeRole} to track enumerable memberships
*/
function _revokeRole(bytes32 role, address account) internal virtual override {
super._revokeRole(role, account);
_roleMembers[role].remove(account);
}
}
@openzeppelin/contracts/access/IAccessControl.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IAccessControlEnumerable is IAccessControl {
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/Address.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!Address.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized < type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Returns the highest version that has been initialized. See {reinitializer}.
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
@openzeppelin/contracts/utils/Strings.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
@openzeppelin/contracts/token/ERC721/IERC721.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
@openzeppelin/contracts/token/ERC777/IERC777.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC777/IERC777.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC777Token standard as defined in the EIP.
*
* This contract uses the
* https://eips.ethereum.org/EIPS/eip-1820[ERC1820 registry standard] to let
* token holders and recipients react to token movements by using setting implementers
* for the associated interfaces in said registry. See {IERC1820Registry} and
* {ERC1820Implementer}.
*/
interface IERC777 {
/**
* @dev Emitted when `amount` tokens are created by `operator` and assigned to `to`.
*
* Note that some additional user `data` and `operatorData` can be logged in the event.
*/
event Minted(address indexed operator, address indexed to, uint256 amount, bytes data, bytes operatorData);
/**
* @dev Emitted when `operator` destroys `amount` tokens from `account`.
*
* Note that some additional user `data` and `operatorData` can be logged in the event.
*/
event Burned(address indexed operator, address indexed from, uint256 amount, bytes data, bytes operatorData);
/**
* @dev Emitted when `operator` is made operator for `tokenHolder`.
*/
event AuthorizedOperator(address indexed operator, address indexed tokenHolder);
/**
* @dev Emitted when `operator` is revoked its operator status for `tokenHolder`.
*/
event RevokedOperator(address indexed operator, address indexed tokenHolder);
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the smallest part of the token that is not divisible. This
* means all token operations (creation, movement and destruction) must have
* amounts that are a multiple of this number.
*
* For most token contracts, this value will equal 1.
*/
function granularity() external view returns (uint256);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by an account (`owner`).
*/
function balanceOf(address owner) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* If send or receive hooks are registered for the caller and `recipient`,
* the corresponding functions will be called with `data` and empty
* `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
*
* Emits a {Sent} event.
*
* Requirements
*
* - the caller must have at least `amount` tokens.
* - `recipient` cannot be the zero address.
* - if `recipient` is a contract, it must implement the {IERC777Recipient}
* interface.
*/
function send(
address recipient,
uint256 amount,
bytes calldata data
) external;
/**
* @dev Destroys `amount` tokens from the caller's account, reducing the
* total supply.
*
* If a send hook is registered for the caller, the corresponding function
* will be called with `data` and empty `operatorData`. See {IERC777Sender}.
*
* Emits a {Burned} event.
*
* Requirements
*
* - the caller must have at least `amount` tokens.
*/
function burn(uint256 amount, bytes calldata data) external;
/**
* @dev Returns true if an account is an operator of `tokenHolder`.
* Operators can send and burn tokens on behalf of their owners. All
* accounts are their own operator.
*
* See {operatorSend} and {operatorBurn}.
*/
function isOperatorFor(address operator, address tokenHolder) external view returns (bool);
/**
* @dev Make an account an operator of the caller.
*
* See {isOperatorFor}.
*
* Emits an {AuthorizedOperator} event.
*
* Requirements
*
* - `operator` cannot be calling address.
*/
function authorizeOperator(address operator) external;
/**
* @dev Revoke an account's operator status for the caller.
*
* See {isOperatorFor} and {defaultOperators}.
*
* Emits a {RevokedOperator} event.
*
* Requirements
*
* - `operator` cannot be calling address.
*/
function revokeOperator(address operator) external;
/**
* @dev Returns the list of default operators. These accounts are operators
* for all token holders, even if {authorizeOperator} was never called on
* them.
*
* This list is immutable, but individual holders may revoke these via
* {revokeOperator}, in which case {isOperatorFor} will return false.
*/
function defaultOperators() external view returns (address[] memory);
/**
* @dev Moves `amount` tokens from `sender` to `recipient`. The caller must
* be an operator of `sender`.
*
* If send or receive hooks are registered for `sender` and `recipient`,
* the corresponding functions will be called with `data` and
* `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
*
* Emits a {Sent} event.
*
* Requirements
*
* - `sender` cannot be the zero address.
* - `sender` must have at least `amount` tokens.
* - the caller must be an operator for `sender`.
* - `recipient` cannot be the zero address.
* - if `recipient` is a contract, it must implement the {IERC777Recipient}
* interface.
*/
function operatorSend(
address sender,
address recipient,
uint256 amount,
bytes calldata data,
bytes calldata operatorData
) external;
/**
* @dev Destroys `amount` tokens from `account`, reducing the total supply.
* The caller must be an operator of `account`.
*
* If a send hook is registered for `account`, the corresponding function
* will be called with `data` and `operatorData`. See {IERC777Sender}.
*
* Emits a {Burned} event.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
* - the caller must be an operator for `account`.
*/
function operatorBurn(
address account,
uint256 amount,
bytes calldata data,
bytes calldata operatorData
) external;
event Sent(
address indexed operator,
address indexed from,
address indexed to,
uint256 amount,
bytes data,
bytes operatorData
);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC777/IERC777Recipient.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC777TokensRecipient standard as defined in the EIP.
*
* Accounts can be notified of {IERC777} tokens being sent to them by having a
* contract implement this interface (contract holders can be their own
* implementer) and registering it on the
* https://eips.ethereum.org/EIPS/eip-1820[ERC1820 global registry].
*
* See {IERC1820Registry} and {ERC1820Implementer}.
*/
interface IERC777Recipient {
/**
* @dev Called by an {IERC777} token contract whenever tokens are being
* moved or created into a registered account (`to`). The type of operation
* is conveyed by `from` being the zero address or not.
*
* This call occurs _after_ the token contract's state is updated, so
* {IERC777-balanceOf}, etc., can be used to query the post-operation state.
*
* This function may revert to prevent the operation from being executed.
*/
function tokensReceived(
address operator,
address from,
address to,
uint256 amount,
bytes calldata userData,
bytes calldata operatorData
) external;
}
@openzeppelin/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
@openzeppelin/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/introspection/IERC1820Registry.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the global ERC1820 Registry, as defined in the
* https://eips.ethereum.org/EIPS/eip-1820[EIP]. Accounts may register
* implementers for interfaces in this registry, as well as query support.
*
* Implementers may be shared by multiple accounts, and can also implement more
* than a single interface for each account. Contracts can implement interfaces
* for themselves, but externally-owned accounts (EOA) must delegate this to a
* contract.
*
* {IERC165} interfaces can also be queried via the registry.
*
* For an in-depth explanation and source code analysis, see the EIP text.
*/
interface IERC1820Registry {
event InterfaceImplementerSet(address indexed account, bytes32 indexed interfaceHash, address indexed implementer);
event ManagerChanged(address indexed account, address indexed newManager);
/**
* @dev Sets `newManager` as the manager for `account`. A manager of an
* account is able to set interface implementers for it.
*
* By default, each account is its own manager. Passing a value of `0x0` in
* `newManager` will reset the manager to this initial state.
*
* Emits a {ManagerChanged} event.
*
* Requirements:
*
* - the caller must be the current manager for `account`.
*/
function setManager(address account, address newManager) external;
/**
* @dev Returns the manager for `account`.
*
* See {setManager}.
*/
function getManager(address account) external view returns (address);
/**
* @dev Sets the `implementer` contract as ``account``'s implementer for
* `interfaceHash`.
*
* `account` being the zero address is an alias for the caller's address.
* The zero address can also be used in `implementer` to remove an old one.
*
* See {interfaceHash} to learn how these are created.
*
* Emits an {InterfaceImplementerSet} event.
*
* Requirements:
*
* - the caller must be the current manager for `account`.
* - `interfaceHash` must not be an {IERC165} interface id (i.e. it must not
* end in 28 zeroes).
* - `implementer` must implement {IERC1820Implementer} and return true when
* queried for support, unless `implementer` is the caller. See
* {IERC1820Implementer-canImplementInterfaceForAddress}.
*/
function setInterfaceImplementer(
address account,
bytes32 _interfaceHash,
address implementer
) external;
/**
* @dev Returns the implementer of `interfaceHash` for `account`. If no such
* implementer is registered, returns the zero address.
*
* If `interfaceHash` is an {IERC165} interface id (i.e. it ends with 28
* zeroes), `account` will be queried for support of it.
*
* `account` being the zero address is an alias for the caller's address.
*/
function getInterfaceImplementer(address account, bytes32 _interfaceHash) external view returns (address);
/**
* @dev Returns the interface hash for an `interfaceName`, as defined in the
* corresponding
* https://eips.ethereum.org/EIPS/eip-1820#interface-name[section of the EIP].
*/
function interfaceHash(string calldata interfaceName) external pure returns (bytes32);
/**
* @notice Updates the cache with whether the contract implements an ERC165 interface or not.
* @param account Address of the contract for which to update the cache.
* @param interfaceId ERC165 interface for which to update the cache.
*/
function updateERC165Cache(address account, bytes4 interfaceId) external;
/**
* @notice Checks whether a contract implements an ERC165 interface or not.
* If the result is not cached a direct lookup on the contract address is performed.
* If the result is not cached or the cached value is out-of-date, the cache MUST be updated manually by calling
* {updateERC165Cache} with the contract address.
* @param account Address of the contract to check.
* @param interfaceId ERC165 interface to check.
* @return True if `account` implements `interfaceId`, false otherwise.
*/
function implementsERC165Interface(address account, bytes4 interfaceId) external view returns (bool);
/**
* @notice Checks whether a contract implements an ERC165 interface or not without using or updating the cache.
* @param account Address of the contract to check.
* @param interfaceId ERC165 interface to check.
* @return True if `account` implements `interfaceId`, false otherwise.
*/
function implementsERC165InterfaceNoCache(address account, bytes4 interfaceId) external view returns (bool);
}
@openzeppelin/contracts/utils/math/Math.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
contracts/interfaces/IWeb3Entry.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.8.16;
import "../libraries/DataTypes.sol";
interface IWeb3Entry {
function initialize(
string calldata name_,
string calldata symbol_,
address linklist_,
address mintNFTImpl_,
address periphery_,
address newbieVilla_
) external;
////////////////////////////////////////////////////////
/// EXTERNAL FUNCTIONS
////////////////////////////////////////////////////////
function createCharacter(
DataTypes.CreateCharacterData calldata vars
) external returns (uint256 characterId);
function setHandle(uint256 characterId, string calldata newHandle) external;
function setSocialToken(uint256 characterId, address tokenAddress) external;
function setCharacterUri(uint256 characterId, string calldata newUri) external;
function setPrimaryCharacterId(uint256 characterId) external;
function grantOperatorPermissions(
uint256 characterId,
address operator,
uint256 permissionBitMap
) external;
function migrateOperatorSyncPermissions(uint256[] calldata characterIds) external;
function grantOperators4Note(
uint256 characterId,
uint256 noteId,
address[] calldata blocklist,
address[] calldata allowlist
) external;
function setLinklistUri(uint256 linkListId, string calldata uri) external;
function linkAddress(DataTypes.linkAddressData calldata vars) external;
function unlinkAddress(DataTypes.unlinkAddressData calldata vars) external;
function linkCharacter(DataTypes.linkCharacterData calldata vars) external;
function unlinkCharacter(DataTypes.unlinkCharacterData calldata vars) external;
function createThenLinkCharacter(DataTypes.createThenLinkCharacterData calldata vars) external;
function linkNote(DataTypes.linkNoteData calldata vars) external;
function unlinkNote(DataTypes.unlinkNoteData calldata vars) external;
function linkERC721(DataTypes.linkERC721Data calldata vars) external;
function unlinkERC721(DataTypes.unlinkERC721Data calldata vars) external;
function linkAnyUri(DataTypes.linkAnyUriData calldata vars) external;
function unlinkAnyUri(DataTypes.unlinkAnyUriData calldata vars) external;
/*
function linkCharacterLink(
uint256 fromCharacterId,
DataTypes.CharacterLinkStruct calldata linkData,
bytes32 linkType
) external;
function unlinkCharacterLink(
uint256 fromCharacterId,
DataTypes.CharacterLinkStruct calldata linkData,
bytes32 linkType
) external;
*/
function linkLinklist(DataTypes.linkLinklistData calldata vars) external;
function unlinkLinklist(DataTypes.unlinkLinklistData calldata vars) external;
/*
* These functions are temporarily commented out, in order to limit the contract code size within 24K.
* These functions will be restored when necessary in the future.
*/
// function setLinkModule4Character(DataTypes.setLinkModule4CharacterData calldata vars) external;
// function setLinkModule4Note(DataTypes.setLinkModule4NoteData calldata vars) external;
// function setLinkModule4ERC721(DataTypes.setLinkModule4ERC721Data calldata vars) external;
function setLinkModule4Linklist(DataTypes.setLinkModule4LinklistData calldata vars) external;
function setLinkModule4Address(DataTypes.setLinkModule4AddressData calldata vars) external;
function mintNote(DataTypes.MintNoteData calldata vars) external returns (uint256);
function setMintModule4Note(DataTypes.setMintModule4NoteData calldata vars) external;
function postNote(DataTypes.PostNoteData calldata vars) external returns (uint256);
function setNoteUri(uint256 characterId, uint256 noteId, string calldata newUri) external;
function lockNote(uint256 characterId, uint256 noteId) external;
function deleteNote(uint256 characterId, uint256 noteId) external;
function postNote4Character(
DataTypes.PostNoteData calldata postNoteData,
uint256 toCharacterId
) external returns (uint256);
function postNote4Address(
DataTypes.PostNoteData calldata noteData,
address ethAddress
) external returns (uint256);
function postNote4Linklist(
DataTypes.PostNoteData calldata noteData,
uint256 toLinklistId
) external returns (uint256);
function postNote4Note(
DataTypes.PostNoteData calldata postNoteData,
DataTypes.NoteStruct calldata note
) external returns (uint256);
function postNote4ERC721(
DataTypes.PostNoteData calldata postNoteData,
DataTypes.ERC721Struct calldata erc721
) external returns (uint256);
function postNote4AnyUri(
DataTypes.PostNoteData calldata postNoteData,
string calldata uri
) external returns (uint256);
////////////////////////////////////////////////////////
/// VIEW FUNCTIONS
////////////////////////////////////////////////////////
function getOperators(uint256 characterId) external view returns (address[] memory);
function getOperatorPermissions(
uint256 characterId,
address operator
) external view returns (uint256);
function getOperators4Note(
uint256 characterId,
uint256 noteId
) external view returns (address[] memory blocklist, address[] memory allowlist);
function isOperatorAllowedForNote(
uint256 characterId,
uint256 noteId,
address operator
) external view returns (bool);
function getPrimaryCharacterId(address account) external view returns (uint256);
function isPrimaryCharacter(uint256 characterId) external view returns (bool);
function getCharacter(uint256 characterId) external view returns (DataTypes.Character memory);
function getCharacterByHandle(
string calldata handle
) external view returns (DataTypes.Character memory);
function getHandle(uint256 characterId) external view returns (string memory);
function getCharacterUri(uint256 characterId) external view returns (string memory);
function getNote(
uint256 characterId,
uint256 noteId
) external view returns (DataTypes.Note memory);
function getLinkModule4Address(address account) external view returns (address);
function getLinkModule4Linklist(uint256 tokenId) external view returns (address);
function getLinkModule4ERC721(
address tokenAddress,
uint256 tokenId
) external view returns (address);
function getLinklistUri(uint256 tokenId) external view returns (string memory);
function getLinklistId(uint256 characterId, bytes32 linkType) external view returns (uint256);
function getLinklistType(uint256 linkListId) external view returns (bytes32);
function getLinklistContract() external view returns (address);
function getRevision() external pure returns (uint256);
}
contracts/libraries/DataTypes.sol
// SPDX-License-Identifier: MIT
// solhint-disable contract-name-camelcase
pragma solidity 0.8.16;
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
/**
* @title DataTypes
* @notice A standard library of data types.
*/
library DataTypes {
struct MigrateData {
address account;
string handle;
string uri;
address[] toAddresses;
bytes32 linkType;
}
struct CreateCharacterData {
address to;
string handle;
string uri;
address linkModule;
bytes linkModuleInitData;
}
struct createThenLinkCharacterData {
uint256 fromCharacterId;
address to;
bytes32 linkType;
}
struct linkNoteData {
uint256 fromCharacterId;
uint256 toCharacterId;
uint256 toNoteId;
bytes32 linkType;
bytes data;
}
struct unlinkNoteData {
uint256 fromCharacterId;
uint256 toCharacterId;
uint256 toNoteId;
bytes32 linkType;
}
struct linkCharacterData {
uint256 fromCharacterId;
uint256 toCharacterId;
bytes32 linkType;
bytes data;
}
struct unlinkCharacterData {
uint256 fromCharacterId;
uint256 toCharacterId;
bytes32 linkType;
}
struct linkERC721Data {
uint256 fromCharacterId;
address tokenAddress;
uint256 tokenId;
bytes32 linkType;
bytes data;
}
struct unlinkERC721Data {
uint256 fromCharacterId;
address tokenAddress;
uint256 tokenId;
bytes32 linkType;
}
struct linkAddressData {
uint256 fromCharacterId;
address ethAddress;
bytes32 linkType;
bytes data;
}
struct unlinkAddressData {
uint256 fromCharacterId;
address ethAddress;
bytes32 linkType;
}
struct linkAnyUriData {
uint256 fromCharacterId;
string toUri;
bytes32 linkType;
bytes data;
}
struct unlinkAnyUriData {
uint256 fromCharacterId;
string toUri;
bytes32 linkType;
}
struct linkLinklistData {
uint256 fromCharacterId;
uint256 toLinkListId;
bytes32 linkType;
bytes data;
}
struct unlinkLinklistData {
uint256 fromCharacterId;
uint256 toLinkListId;
bytes32 linkType;
}
struct setLinkModule4CharacterData {
uint256 characterId;
address linkModule;
bytes linkModuleInitData;
}
struct setLinkModule4NoteData {
uint256 characterId;
uint256 noteId;
address linkModule;
bytes linkModuleInitData;
}
struct setLinkModule4LinklistData {
uint256 linklistId;
address linkModule;
bytes linkModuleInitData;
}
struct setLinkModule4ERC721Data {
address tokenAddress;
uint256 tokenId;
address linkModule;
bytes linkModuleInitData;
}
struct setLinkModule4AddressData {
address account;
address linkModule;
bytes linkModuleInitData;
}
struct setMintModule4NoteData {
uint256 characterId;
uint256 noteId;
address mintModule;
bytes mintModuleInitData;
}
struct linkCharactersInBatchData {
uint256 fromCharacterId;
uint256[] toCharacterIds;
bytes[] data;
address[] toAddresses;
bytes32 linkType;
}
struct LinkData {
uint256 linklistId;
uint256 linkItemType;
uint256 linkingCharacterId;
address linkingAddress;
uint256 linkingLinklistId;
bytes32 linkKey;
}
struct PostNoteData {
uint256 characterId;
string contentUri;
address linkModule;
bytes linkModuleInitData;
address mintModule;
bytes mintModuleInitData;
bool locked;
}
struct MintNoteData {
uint256 characterId;
uint256 noteId;
address to;
bytes mintModuleData;
}
// character struct
struct Character {
uint256 characterId;
string handle;
string uri;
uint256 noteCount;
address socialToken;
address linkModule;
}
/**
* @dev A struct containing data associated with each new note.
* @param linkItemType The link type of this note, if the note is a note with link.
* @param linkKey If linkKey is not empty, it is a note with link(eg.a comment to a character or a note).
* @param contentURI The URI associated with this note.
* @param linkModule The address of the current link module of this note, can be empty.
* @param mintModule The address of the current mint module of this note, can be empty.
* @param mintNFT The address of the mintNFT associated with this note, if any..
* @param deleted Whether the note is deleted.
* @param locked Whether the note is locked. If the note is locked, its owner can't set not uri anymore.
*/
struct Note {
bytes32 linkItemType;
bytes32 linkKey;
string contentUri;
address linkModule;
address mintModule;
address mintNFT;
bool deleted;
bool locked;
}
struct CharacterLinkStruct {
uint256 fromCharacterId;
uint256 toCharacterId;
bytes32 linkType;
}
struct NoteStruct {
uint256 characterId;
uint256 noteId;
}
struct ERC721Struct {
address tokenAddress;
uint256 erc721TokenId;
}
/**
@param blocklist The list of blocklist addresses.
@param allowlist The list of allowlist addresses.
*/
struct Operators4Note {
EnumerableSet.AddressSet blocklist;
EnumerableSet.AddressSet allowlist;
}
}
contracts/libraries/OP.sol
// SPDX-License-Identifier: MIT
// solhint-disable private-vars-leading-underscore
pragma solidity 0.8.16;
/**
* @dev every uint8 stands for a single method in Web3Entry.sol.
* For most cases, we recommend simply granting operators the OPERATOR_SIGN_PERMISSION_BITMAP,
* which gives operator full permissions aside from owner permissions and future permissions, but for
* those who're more aware of access control, the custom permission bitmap is all yours,
* and you can find every customizable methods below.
* `OPERATOR_SIGN_PERMISSION_BITMAP` have access to all methods in `OPERATOR_SYNC_PERMISSION_BITMAP`
* plus more permissions for signing.
* Permissions are laid out in a increasing order of power.
* so the bitmap looks like this:
* | opSync | opSign | future | owner |
* |------------|------------|------------|----------|
* |255------236|235------176|175-------21|20-------0|
*/
library OP {
uint256 internal constant UINT256_MAX = ~uint256(0);
// [0,20] for owner permissions
uint8 internal constant SET_HANDLE = 0;
uint8 internal constant SET_SOCIAL_TOKEN = 1;
uint8 internal constant GRANT_OPERATOR_PERMISSIONS = 2;
// uint8 internal constant GRANT_OPERATOR_PERMISSIONS_FOR_NOTE = 3;
uint8 internal constant GRANT_OPERATORS_FOR_NOTE = 3;
// set [0, 3] bit index
uint256 internal constant OWNER_PERMISSION_BITMAP = ~(UINT256_MAX << 4);
// [21, 175] are reserved for future
// [176, 235] for operator sign permissions
uint8 internal constant SET_CHARACTER_URI = 176;
uint8 internal constant SET_LINKLIST_URI = 177;
uint8 internal constant LINK_CHARACTER = 178;
uint8 internal constant UNLINK_CHARACTER = 179;
uint8 internal constant CREATE_THEN_LINK_CHARACTER = 180;
uint8 internal constant LINK_NOTE = 181;
uint8 internal constant UNLINK_NOTE = 182;
uint8 internal constant LINK_ERC721 = 183;
uint8 internal constant UNLINK_ERC721 = 184;
uint8 internal constant LINK_ADDRESS = 185;
uint8 internal constant UNLINK_ADDRESS = 186;
uint8 internal constant LINK_ANYURI = 187;
uint8 internal constant UNLINK_ANYURI = 188;
uint8 internal constant LINK_LINKLIST = 189;
uint8 internal constant UNLINK_LINKLIST = 190;
uint8 internal constant SET_LINK_MODULE_FOR_CHARACTER = 191;
uint8 internal constant SET_LINK_MODULE_FOR_NOTE = 192;
uint8 internal constant SET_LINK_MODULE_FOR_LINKLIST = 193;
uint8 internal constant SET_MINT_MODULE_FOR_NOTE = 194;
uint8 internal constant SET_NOTE_URI = 195;
uint8 internal constant LOCK_NOTE = 196;
uint8 internal constant DELETE_NOTE = 197;
uint8 internal constant POST_NOTE_FOR_CHARACTER = 198;
uint8 internal constant POST_NOTE_FOR_ADDRESS = 199;
uint8 internal constant POST_NOTE_FOR_LINKLIST = 200;
uint8 internal constant POST_NOTE_FOR_NOTE = 201;
uint8 internal constant POST_NOTE_FOR_ERC721 = 202;
uint8 internal constant POST_NOTE_FOR_ANYURI = 203;
// set [176,204] bit index
// [236, 255] for operator sync permissions
uint8 internal constant POST_NOTE = 236;
// set 236 bit index
uint256 internal constant POST_NOTE_PERMISSION_BITMAP = 1 << POST_NOTE;
// POST_NOTE_DEFAULT_PERMISSION_BITMAP has post note related permissions
uint256 internal constant POST_NOTE_DEFAULT_PERMISSION_BITMAP =
((UINT256_MAX << 198) & ~(UINT256_MAX << 204)) | POST_NOTE_PERMISSION_BITMAP;
// DEFAULT_PERMISSION_BITMAP has operator sign permissions and operator sync permissions
uint256 internal constant DEFAULT_PERMISSION_BITMAP =
((UINT256_MAX << 176) & ~(UINT256_MAX << 204)) | POST_NOTE_PERMISSION_BITMAP;
// bitmap mask with all current-in-use methods to 1
uint256 internal constant ALLOWED_PERMISSION_BITMAP_MASK =
OWNER_PERMISSION_BITMAP | DEFAULT_PERMISSION_BITMAP;
}
